Wright Staining Kit - BioReagent, Biological Stain, for microscopy, high purity

Cat. No.: W743386
AVAILABLE TO ORDER
GRADE & PURITY BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Biological Stain ? Biological stain grade — dyes characterized for staining cells and tissues. Use in histology and microscopy where staining consistency matters. for Microscopy ? Microscopy grade — reagents/stains suited to sample prep and imaging. Use in microscopy where clarity and low background are needed.
 ·  off list, applied to all prices below.
Size
Status
Price
Qty
2×100ml
W743386-2×100ml
1-2 wks(?)
Item is derived from our semi-finished stock and is processed in 1-2 weeks.
$19.90
2×500ml
W743386-2×500ml
1-2 wks(?)
Item is derived from our semi-finished stock and is processed in 1-2 weeks.
$57.90
Enter a quantity for the sizes you want to add.
🧪

Why this grade

BioReagent, Biological Stain, for microscopy Biological Stain,BioReagent,for Microscopy for sensitive chromatographic and analytical workflows requiring minimal baseline interference.

🌡

Storage & shipping

Protected from light,Room temperature Ships Normal Check lot-specific COA for exact specifications.

📋

Quality documents

SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.

📚

Literature proof

Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.

Overview

Wright's stain is a compound dye consisting of the acidic dye Eosin and the basic dye Methylene Blue, which provides good differential staining for protoplasm. Different cellular components have distinct chemical properties and varying affinities to different dyes. For instance, hemoglobin and eosinophilic granules are alkaline proteins that bind with the acidic dye Eosin and stain pink, which are referred to as eosinophilic substances. Nuclear proteins, lymphocytes and the cytoplasm of basophilic granulocytes are acidic; they combine with the basic dye to stain purplish blue or blue and are called basophilic substances. Neutrophilic granules are at the isoelectric point and can bind both Eosin and Methylene Blue, staining pale magenta and named neutrophilic substances. The cytoplasm and nucleoli of pronormoblasts and early erythroblasts contain abundant acidic substances and stain deep blue. Intermediate erythroblasts contain both acidic and alkaline substances, staining reddish blue or grayish red. Fully mature red blood cells lose all acidic substances completely and stain pink. Wright's staining solution is a clear blue liquid with a characteristic methanol odor, mainly composed of Methylene Blue, Eosin and methanol. Methanol serves to dissolve Methylene Blue and Eosin as well as fix cell morphology.

Wright's staining solution is prepared by grinding with Wright's pigment as the main raw material, which can achieve clear staining results of cells.Characteristics of this staining solution: It is composed of Wright's staining solution and phosphate buffer solution, and can be used directly without any preparation. A trace amount of neutral glycerin is added into the staining solution to prevent methanol from volatilizing or oxidizing, and also make the staining of blood cells clearer. It is often used for staining blood smears, cell smears, bone marrow cell smears and bacteria. The cytoplasm is red, cell nuclei and bacteria are blue, and eosinophilic granules are orange-red.

Component List:

W743386Component2×100 mL2×500 mLStorage
W743386AWright's Stain Solution100 mL500 mLRoom temperature, store away from light
W743386BPhosphate Buffer Solution100 mL500 mLRoom temperatur

Instructions for Use:

1. Prepare blood smears, bone marrow smears or bacterial smears by conventional methods and let the smears air dry naturally.

2. Place the blood smears or bone marrow smears on a staining rack.

3. Drop an appropriate amount of Wright's staining solution to cover the smears and stain at room temperature for 2–3 minutes.

4. Add an equal volume of phosphate buffer solution onto the smears. Gently shake the slide or mix the liquids in other ways to fully blend phosphate buffer solution and Wright's staining solution, then let it stand at room temperature for 3–10 minutes.

5. Gently rinse the slide from one end with tap water or distilled water.

Note: Phosphate buffer solution can also be used to rinse the slide for about 30 seconds.

6. Air dry the slide.

7. Microscopic examination: Observe the blood smear under low-power lens first, then under oil immersion lens.

Precautions:

1. Blood smears and bone marrow smears shall be evenly spread in thickness to avoid affecting the staining effect.

2. Do not pour off the staining solution in advance or flush the slide hard during staining. Never pour out the staining solution first, otherwise dyes will precipitate and attach to the smear.

3. The staining solution can be reused but not repeatedly for many times. Filter the solution before reuse if precipitates appear.

4. Over-stained samples can be properly decolorized with methanol or ethanol; restaining is not recommended.

5. Adjust the staining time or working solution concentration if the staining result is too dark or too light.

6. pH value has a certain influence on staining. Slides must be clean and free of acid and alkali contamination to prevent poor staining results.

7. Wear a lab coat and disposable gloves during operation for your personal safety and health.

Staining Result

Bacteria and cell nucleusBlue
Eosinophilic granulesPink or orange-red
Lymphocytes and cytoplasm of basophilic granulocytesPurplish blue or blue
Fully mature red blood cellsPink
Storage and Shipping
Storage
Protected from light,Room temperature
Shipped In
Normal
Stability And Storage
Store at room temperature long term (24 months). Store in the dark.

Documentation

📋 Safety Data Sheet (SDS)

Comprehensive hazard, handling, storage, and regulatory compliance document.

Download SDS →

✅ Certificate of Analysis (COA)

Lot-specific quality data. Enter your lot number to retrieve the exact COA.

Look up COA →

📊 Datasheet

Quick-reference summary of product specifications and applications.

View datasheet →

🔬 Specification Sheet

Full quality attributes and acceptance criteria for this grade.

View spec sheet →

Advanced Data

Certificates(CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDateItem
ZJ26F0333436Certificate of AnalysisMar 24, 2026 W743386
Documents & Articles
Solution Calculators
Reviews

Customer Reviews

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.