Determine the necessary mass, volume, or concentration for preparing a solution.
Basic Description
| Synonyms | Triglycidyl isocyanurate | 2451-62-9 | 1,3,5-Triglycidyl isocyanurate | 1,3,5-tris(oxiran-2-ylmethyl)-1,3,5-triazinane-2,4,6-trione | Triglycidylisocyanurate | Tris(2,3-epoxypropyl) isocyanurate | Glycidyl isocyanurate | Tri(epoxypropyl)isocyanurate | Tris(2,3-epoxypropy |
|---|---|
| Specifications & Purity | 10mM in DMSO |
| Storage Temp | Store at -80°C |
| Shipped In | Ice chest + Ice pads |
| Product Description | Triglycidyl isocyanurate is a reagent used in the synthesis of N-Benzyl Metaxalone , which is a muscle relaxant used to relax muscles and relieve pain. |
AI Insight
Mechanisms of Action
| Mechanism of Action | Action Type | target ID | Target Name | Target Type | Target Organism | Binding Site Name | References |
|---|
Names and Identifiers
| IUPAC Name | 1,3,5-tris(oxiran-2-ylmethyl)-1,3,5-triazinane-2,4,6-trione |
|---|---|
| INCHI | InChI=1S/C12H15N3O6/c16-10-13(1-7-4-19-7)11(17)15(3-9-6-21-9)12(18)14(10)2-8-5-20-8/h7-9H,1-6H2 |
| InChi Key | OUPZKGBUJRBPGC-UHFFFAOYSA-N |
| Canonical SMILES | C1C(O1)CN2C(=O)N(C(=O)N(C2=O)CC3CO3)CC4CO4 |
| Isomeric SMILES | C1C(O1)CN2C(=O)N(C(=O)N(C2=O)CC3CO3)CC4CO4 |
| RTECS | XZ1994900 |
| PubChem CID | 17142 |
| Molecular Weight | 297.26 |
| Reaxy-Rn | 765833 |
Certificates（CoA,COO,BSE/TSE and Analysis Chart)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Safety and Hazards(GHS)
| Pictogram(s) | GHS06, GHS08, GHS05, GHS07 |
|---|---|
| Signal | Danger |
| Hazard Statements | H301:Toxic if swallowed H331:Toxic if inhaled H373:Causes damage to organs through prolonged or repeated exposure H412:Harmful to aquatic life with long lasting effects H318:Causes serious eye damage H317:May cause an allergic skin reaction H340:May cause genetic defects |
| Precautionary Statements | P261:Avoid breathing dust/fume/gas/mist/vapors/spray. P273:Avoid release to the environment. P280:Wear protective gloves/protective clothing/eye protection/face protection. P302+P352:IF ON SKIN: wash with plenty of water. P321:Specific treatment (see ... on this label). P405:Store locked up. P501:Dispose of contents/container to ... P264:Wash hands [and …] thoroughly after handling. P260:Do not breathe dust/fume/gas/mist/vapors/spray. P281:Use personal protective equipment as required. P271:Use only outdoors or in a well-ventilated area. P270:Do not eat, drink or smoke when using this product. P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing. P403+P233:Store in a well-ventilated place. Keep container tightly closed. P272:Contaminated work clothing should not be allowed out of the workplace. P333+P313:IF SKIN irritation or rash occurs: Get medical advice/attention. P362+P364:Take off contaminated clothing and wash it before reuse. P330:Rinse mouth. P203:Obtain, read and follow all safety instructions before use. P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes. P301+P316:IF SWALLOWED: Get emergency medical help immediately. P305+P354+P338:IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P318:if exposed or concerned, get medical advice. P317:Get emergency medical help. P316:Get emergency medical help immediately. P319:Get medical help if you feel unwell. |
| RTECS | XZ1994900 |
| Reaxy-Rn | 765833 |
Related Documents
Reviews
Customer Reviews
Citations of This Product
| 1. Zhengjie Li, Xiaowen Qi, Changxin Liu, Bingli Fan, Xiao Yang. (2023) Particle size effect of PTFE on friction and wear properties of glass fiber reinforced epoxy resin composites. WEAR, 532-533 (205104). [PMID:] [10.1016/j.wear.2023.205104] |
| 2. Tianxiang Deng, Shouhai Li, Puyou Jia, Na Yao, Haiyang Ding, Lina Xu, Yan Zhang, Xiaohua Yang, Mei Li. (2022) Self-Plasticized PVC Prepared by Introducing Fatty Acid to the PVC with Triglycidyl Isocyanurate as an Intermediate Bridge. ACS Omega, 7 (40): (35694–35704). [PMID:36249389] [10.1021/acsomega.2c03655] |
| 3. Yapeng Zheng, Kang Zhang, Yan Wang, Chao Ma, Zhou Gui. (2022) Fabrication of a high fire safety, transparent coating for polymethylmethacrylate with superior hardness and adhesion. PROGRESS IN ORGANIC COATINGS, 172 (107079). [PMID:] [10.1016/j.porgcoat.2022.107079] |
| 4. Xie Ruihang, Yuan Yexin, Sun Pengbo, Liu Zhe, Ma Jinpeng, Yang Guorui, Wang Kui, Li Ming, Shang Lei, Ao Yuhui. (2022) Design of epoxy resin with sustainability, high adhesion and excellent flame retardancy based on bio-based molecules. JOURNAL OF MATERIALS SCIENCE, 57 (27): (13078-13096). [PMID:] [10.1007/s10853-022-07399-y] |
| 5. Yunchun Liu, Liyun Hua, Wanru Zhu, Chen Liu, Hongrui You, Hongqi Chen. (2022) A hybrid boronate affinity probe for the selective detection of cis-diol containing compounds in tea beverages. LUMINESCENCE, 37 (6): (1018-1024). [PMID:35416384] [10.1002/bio.4256] |
| 6. Yuan Wang, Jianfei Xiao, Hanzhi Wang, Tian C. Zhang, Shaojun Yuan. (2022) Binary doping of nitrogen and phosphorus into porous carbon: A novel di-functional material for enhancing CO2 capture and super-capacitance. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 99 (73). [PMID:] [10.1016/j.jmst.2021.05.035] |
| 7. Kaifeng Gu, Kaizhen Wang, Yong Zhou, Congjie Gao. (2021) Alkali-resistant polyethyleneimine/triglycidyl isocyanurate nanofiltration membrane for treating lignin lye. JOURNAL OF MEMBRANE SCIENCE, 637 (119631). [PMID:] [10.1016/j.memsci.2021.119631] |
| 8. Congxue Yao, Weiyi Xing, Chao Ma, Lei Song, Yuan Hu, Zeyuan Zhuang. (2020) Synthesis of phytic acid-based monomer for UV-Cured coating to improve fire safety of PMMA. PROGRESS IN ORGANIC COATINGS, 140 (105497). [PMID:] [10.1016/j.porgcoat.2019.105497] |
| 9. Wen Qijuan, Sun Tanghao, Wang Qi, Huang Wenwen, Liu Yunchun. (2019) Unique thiophilic affinity MOFs as specific sorbent for disulfide bond-containing compounds capture. SN Applied Sciences, 1 (7): (1-8). [PMID:] [10.1007/s42452-019-0799-3] |
| 10. Xi Chen, Jun Wang, Siqi Huo, Shuang Yang, Bin Zhang, Haopeng Cai. (2018) Study on properties of flame-retardant cyanate esters modified with DOPO and triazine compounds. POLYMERS FOR ADVANCED TECHNOLOGIES, 29 (10): (2574-2582). [PMID:] [10.1002/pat.4368] |
| 11. Shasha Li, Xi Liu, Changqing Fang, Nailiang Liu, Donghong Liu. (2018) Surface modification and thermal performance of a graphene oxide/novolac epoxy composite. RSC Advances, 8 (37): (20505-20516). [PMID:35542377] [10.1039/C8RA02847H] |
References
| 1. Zhengjie Li, Xiaowen Qi, Changxin Liu, Bingli Fan, Xiao Yang. (2023) Particle size effect of PTFE on friction and wear properties of glass fiber reinforced epoxy resin composites. WEAR, 532-533 (205104). [PMID:] [10.1016/j.wear.2023.205104] |
| 2. Tianxiang Deng, Shouhai Li, Puyou Jia, Na Yao, Haiyang Ding, Lina Xu, Yan Zhang, Xiaohua Yang, Mei Li. (2022) Self-Plasticized PVC Prepared by Introducing Fatty Acid to the PVC with Triglycidyl Isocyanurate as an Intermediate Bridge. ACS Omega, 7 (40): (35694–35704). [PMID:36249389] [10.1021/acsomega.2c03655] |
| 3. Yapeng Zheng, Kang Zhang, Yan Wang, Chao Ma, Zhou Gui. (2022) Fabrication of a high fire safety, transparent coating for polymethylmethacrylate with superior hardness and adhesion. PROGRESS IN ORGANIC COATINGS, 172 (107079). [PMID:] [10.1016/j.porgcoat.2022.107079] |
| 4. Xie Ruihang, Yuan Yexin, Sun Pengbo, Liu Zhe, Ma Jinpeng, Yang Guorui, Wang Kui, Li Ming, Shang Lei, Ao Yuhui. (2022) Design of epoxy resin with sustainability, high adhesion and excellent flame retardancy based on bio-based molecules. JOURNAL OF MATERIALS SCIENCE, 57 (27): (13078-13096). [PMID:] [10.1007/s10853-022-07399-y] |
| 5. Yunchun Liu, Liyun Hua, Wanru Zhu, Chen Liu, Hongrui You, Hongqi Chen. (2022) A hybrid boronate affinity probe for the selective detection of cis-diol containing compounds in tea beverages. LUMINESCENCE, 37 (6): (1018-1024). [PMID:35416384] [10.1002/bio.4256] |
| 6. Yuan Wang, Jianfei Xiao, Hanzhi Wang, Tian C. Zhang, Shaojun Yuan. (2022) Binary doping of nitrogen and phosphorus into porous carbon: A novel di-functional material for enhancing CO2 capture and super-capacitance. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 99 (73). [PMID:] [10.1016/j.jmst.2021.05.035] |
| 7. Kaifeng Gu, Kaizhen Wang, Yong Zhou, Congjie Gao. (2021) Alkali-resistant polyethyleneimine/triglycidyl isocyanurate nanofiltration membrane for treating lignin lye. JOURNAL OF MEMBRANE SCIENCE, 637 (119631). [PMID:] [10.1016/j.memsci.2021.119631] |
| 8. Congxue Yao, Weiyi Xing, Chao Ma, Lei Song, Yuan Hu, Zeyuan Zhuang. (2020) Synthesis of phytic acid-based monomer for UV-Cured coating to improve fire safety of PMMA. PROGRESS IN ORGANIC COATINGS, 140 (105497). [PMID:] [10.1016/j.porgcoat.2019.105497] |
| 9. Wen Qijuan, Sun Tanghao, Wang Qi, Huang Wenwen, Liu Yunchun. (2019) Unique thiophilic affinity MOFs as specific sorbent for disulfide bond-containing compounds capture. SN Applied Sciences, 1 (7): (1-8). [PMID:] [10.1007/s42452-019-0799-3] |
| 10. Xi Chen, Jun Wang, Siqi Huo, Shuang Yang, Bin Zhang, Haopeng Cai. (2018) Study on properties of flame-retardant cyanate esters modified with DOPO and triazine compounds. POLYMERS FOR ADVANCED TECHNOLOGIES, 29 (10): (2574-2582). [PMID:] [10.1002/pat.4368] |
| 11. Shasha Li, Xi Liu, Changqing Fang, Nailiang Liu, Donghong Liu. (2018) Surface modification and thermal performance of a graphene oxide/novolac epoxy composite. RSC Advances, 8 (37): (20505-20516). [PMID:35542377] [10.1039/C8RA02847H] |